MODULAR PLUG CAT.6 SHIELDED 8P8C

Modular plug Cat.6 8P8C 50U Shielded

MODEL:

6S8P8C

PATCH PANEL 12 PORTS CAT.6

SPECIFICATION:

Un-shielded type.

Krone&100 Dual IDC type.

Length: 19", 12 ports

Height: 1U

FETURES:

Each port is 100% tested ensure NEXT and return loss performance.

Individually serialized to support traceability.

Utilizes 110 punchdown termination on back panel and includes retention cap for each port.

Each port contains a universal label that is color coded for T568A and T568B wiring schemes.

Terminates 4 pair, 22-26 AWG, 100 ohm, solid or stranded twisted pair cable.

Mount to standard EIA 19" rack.

Write-on areas for port and panel identification available.

MATERIAL:

Cold-rolled steel +PC, Erosion resistance powder coating.

PACKAGE:

Individual package: 1 pc into polubag, then into white/brown box.

MODEL:

QNET6PP12

PATCH PANEL 12 PORTS CAT. 5E

SPECIFICATION:

Un-shielded type.

Krone&100 Dual IDC type.

Length: 19", 12 ports

Height: 1U

FETURES:

Each port is 100% tested ensure NEXT and return loss performance.

Individually serialized to support traceability.

Utilizes 110 punchdown termination on back panel and includes retention cap for each port.

Each port contains a universal label that is color coded for T568A and T568B wiring schemes.

Terminates 4 pair, 22-26 AWG, 100 ohm, solid or stranded twisted pair cable.

Mount to standard EIA 19" rack.

Write-on areas for port and panel identification available.

MATERIAL:

Cold-rolled steel +PC, Erosion resistance powder coating.

PACKAGE:

Individual package: 1 pc into polubag, then into white/brown box.

MODEL:

QNET5PP12

120 TYPE FACE PLATE QNETFP1

Material ABS high-strength resistance UV.

Desing of mill finish, increase matching with heavy current face plate.

Product material: ABS.

Cat.6/Cat.5e modular face plate can easy to install.

MODEL:

QNETFP1

CAT.3 UTPS 100 PAIRS LAN CABLE

10Base-T, 10Base-T4

100 Pair.

Category 3

International Standard; ISO/IEC11801, ANSI/TIA/EIA568-B

Domestic Insdustry´s Standard: YD/T1019

Comply with the ROHS standard; Many kinds of sheath can be designed according to the environmental demands.

Special desing for trunk voice transmission.

Impedance: 1-16MHz.

Max. mutual Capacitance: 6.6nF/100m

Max. unbalanced DC resistance: 2.5%

Max. differential phase:10 times diameter of the cable.

Fixing temperature: 0 ~ +55ºC

Operating temperature: -20ºC ~ +60ºC

Max. Tension: 80N

Min. dielectric strength between conductors: 1.0kV/min

MODEL:

QNETCAT3100P

CAT.3 UTP 50 PAIRS LAN CABLE

10Base-T, 10Base-T4

50 Pair.

Category 3

International Standard; ISO/IEC11801, ANSI/TIA/EIA568-B

Domestic Insdustry´s Standard: YD/T1019

Comply with the ROHS standard; Many kinds of sheath can be designed according to the environmental demands.

Special desing for trunk voice transmission.

Impedance: 1-16MHz.

Max. mutual Capacitance: 6.6nF/100m

Max. unbalanced DC resistance: 2.5%

Max. differential phase:10 times diameter of the cable.

Fixing temperature: 0 ~ +55ºC

Operating temperature: -20ºC ~ +60ºC

Max. Tension: 80N

Min. dielectric strength between conductors: 1.0kV/min

MODEL:

QNETCAT350P

CAT.3 UTP 25 PAIR LAN CABLE

10Base-T, 10Base-T4

25 Pair.

Category 3

International Standard; ISO/IEC11801, ANSI/TIA/EIA568-B

Domestic Insdustry´s Standard: YD/T1019

Comply with the ROHS standard; Many kinds of sheath can be designed according to the environmental demands.

Special desing for trunk voice transmission.

Impedance: 1-16MHz.

Max. mutual Capacitance: 6.6nF/100m

Max. unbalanced DC resistance: 2.5%

Max. differential phase:10 times diameter of the cable.

Fixing temperature: 0 ~ +55ºC

Operating temperature: -20ºC ~ +60ºC

Max. Tension: 80N

Min. dielectric strength between conductors: 1.0kV/min

MODEL:

QNETCAT325P

CAT.7 UTO LAN CABLE

Used as cabling among the cross-connecting box and the communication output end of the operation area or between main distribution frames.

Transmission rate up to 600MHz.

Rated temperature: 60ºC1 75ºC

Reference Standard: TIA/EIA568B

Bare Solid or Standard Copper Conductor.

Colour-coded PE instalation.

Shield: AI/Mylar and braid.

PVC or LSZH jacket.

Flammability grade: CMG, CMX, CM, CMR, CMP Optional.

APPLICATION:

100 BaseT-4

100 Base-TX

100 VG

1000 Base-T (Gigabit Ethernet)

155 Mbps ATM

622 Mbps ATM

Voip, ISDN, Token.

100 Mbps TP-PMD.

TR-16Active and passive.

155 Mit/ 622 Mbit / 1.2 Gbit ATM

CAT.3 UTP 2 PAIRS LAN CABLE

Mainly used in telephone communication, fax machine conection, door bell application, other voice and signal transmission.

No. of conductor: 2 cores.

Conductor size: 23AWG.

Insulation material: PE, HDPE.

Jacket: PVC, RoHS, PVC, LSZH, PVC.

Insulation thickenss: 0.2mm

Eternal diameter: 0.9mm

Operating temperature: Optinal.

DC resistance imbalance: 2.50%

Stretching resistance: (max) 250N

Shield: Unshielded twisted pairs.

Transmission velocity: 72%

Operating temperature: -40ºC-+70ºC

CAT.6 FTP LAN CABLE

This kind of cable use bare copper to be the center conduction, with the specification is24 AWG; PE is adopted to be the dielectric; Each pair of the coppers is covered by polyester film and AL foil even outer. The erath wire is instalatled between these two covers.

Beside, LSZH is also aat option. Various colors make network much easier.

This Cat.6 FTP cable is well conformed to the ISO/IEC, TIA/EIA and EN standard and whose electrical characteristics are exceed the lastest ISO/EC Cat.6 standards.

Rated Temperature: 75ºC

Impedance: 100+/-15

Static electric capacity: mac: 17.1nf/kf

Roted communicate rate: 65%

APPLICATION:

10/100/1000Mbps Ethernet

100VGAnyLAN

Token ring

ATM155/ATM622 etc

MODEL:

QNET6FTP-100%CU

CAT.5E FTP LAN CABLE

This kind of cable use bare copper to be the center conduction, with the specification is 24 AWG, PE is adopted to be the dielectrc; Each pair of the coppers is covered by polyester film and AL foil even outer. The erath wire is instalatled between these two covers.

Veside, LSZH is also at option. Various colors make network much easier. 

This Cat.5e FTP cable is well conformed to the ISO/IEC, TIA/EIA and EN standards and whose electrical characteristics are exceed the lastest ISO/IEC Cat.5e standards.

Rated Temperature: 75ºC

Impedance: 100+/-15

Static electric capacity: max: 17.1nf/kf

Resistance: max: 28.6/kf

Roted communicate rate: 65%

APPLICATION:

10/100/1000Mbps Ethernet

100VGAnyLAN

Token ring.

ATM155/ATM622 etc

MODEL:

QNET5EFTP-100%CU

CAT.6 UTP LAN CABLE

This kind of cable use bare copper to be center conduction with the specification is 24 AWG and PE to be the dielectric.

This jacket is made of fireproof material, which is so meanful to the Cat.6 

This Cat.6 UTP cable is conform to the SIO/EC, TIA/EOA and EN standards and the electrical characteristics are exceed the lastest Cat.6 standards.

LSZH: means "Low smoke zero halogen", which is the symbol of environmental protection.

Rated Temperature: 75ºC.

Impedance: 100+/-15

Static electric capacity: 51pF/m 1KHz

Return resistance: 9.4/100m

Roted communicate rate: 65%

APPLICATION:

10/100/1000Mbs Ethernet

100VGAnyLAN

Token ring.

ATM155/ATM622 etc

MODEL:

QNET6GY-100%CU

CAT.5E UTP LAN CABLE

This kind of cable use bare copper to be center conduction with the specification is 24 AWG and PE to be the dielectric.

The jacket is made of fireproof material, which is so meanful to the Cat.5e indoor

Number of conductors: 8

Colour: Blue, Grey, White or optional.

Conductor: Copper

This Cat.5e UTP cable is conform to the SIO/EC, TIA/EOA and EN standards.

LSZH: means "Low smoke zero halogen", which is the symbol of environmental protection.

Rated Temperature: 75ºC.

Impedance: 100+/-15

Static electric capacity: max: 17.1nf/kf

Resistance: max: 28.6/kf

Roted communicate rate: 65%

APPLICATION:

10/100 Mbps Ethernet

100VGAnyLAN

Token ring

ATM155/ATM622 etc

MODEL: 

QNET5EBL-100%CU

PLASTIC SPLIT COUPLINGS

This series of reusable air-tight molded couplings was introduced specifically to replace expensive two piece removable metal couplings.

The couplings are injection molded of a UV protected glass fiver reinforced nylon, and underground applications with today`s blown fiber rechnology.

HDPE INNERDUCT

Premier Corrugated HDPE is manufactured from High Density Polyethylene (HDPE) and is intenteded to be placed inside of existing innerduct.

It`s ideal for pulls under 1000 ft. and is designed to reduce surface contact when pulling cable.

This lightweigth product offers maximum flexibility, and allows for installation in small or restricted areas.

Corrugated duct is available in 1", 1 1/4", 1 1/2" and 2"

The standard color is orange.

Sequential marked footage is standard.

MODEL:

INN1"